Tuesday, August 4, 2015

Winter Tree

Tool:
      • Escoda Perla - no. 12
      • Escoda Perla - no. 8
      • Princeton - no. 0
      • Masking Fluid
      • Plastic Palette Knife
Colour:
  • Cobalt Blue
  • Yellow Ochre
  • Burnt Sienna
  • Deep Green 
  • Prussian Blue
  • Violet
Size: 6" x 8"
Paper: 140lb cold press


  • Draft with a pencil lightly.
  • Use the masking fluid to mask the snow on the tree and the falling snow.
  • Wet the paper and paint the background with the grey (Cobalt Blue + Burnt Sienna), add some more Cobalt Blue on the ground area.
  • When the paper is still damp, mix the grey (Cobalt Blue + Burnt Sienna) to paint the tree at the far side. 
  • When it's getting drier, use the plastic palette knife to scratch the tree lines.
  • Mix the Dark Green with some Cobalt Blue to paint the tree.
  • For the darker area, all the Prussian Blue in the Dark Green and paint it.
  • Add some Violet in the paint and paint the darker area.
  • When it's still damp, use the plastic palette know to scratch the lines.
  • When everything is dried, remove the masking fluid.
  • Paint the shadow on the snow in Cobalt Blue.
  • Paint Yellow Ochre at the bottom of the snow.
  • Refine the snow shadow with some Prussian Blue and Violet.
























工具:
  • Escoda Perla - no. 12
  • Escoda Perla - no. 8
  • Princeton - no. 0
  • 遮蓋液
  • 膠畫刀
顏色:
  • Cobalt Blue
  • Yellow Ochre
  • Burnt Sienna
  • Deep Green 
  • Prussian Blue
  • Violet
尺寸: 6" x 8"
紙: 140lb cold press

  • 用鉛筆輕輕起稿。
  • 以遮蓋液把樹上和下著的雪畫在畫紙上待乾。
  • 把紙弄濕再畫上灰色 (Cobalt Blue + Burnt Sienna), 然後加多一點Cobalt Blue畫地下。
  • 當紙還未全乾時,用灰色(Cobalt Blue + Burnt Sienna)畫遠處的樹。
  • 再用膠畫刀括出樹枝。
  • 用Dark Green混一些 Cobalt Blue畫樹。
  • 加入Prussian Blue在Dark Green 畫較深色的地方,雪的下方。
  • 可加一些 Violet 在深色的地方。
  • 當顏色還未全乾時,用膠畫刀把樹的邊緣顏色向外括修整樹形。
  • 當顏色完全乾透時,擦去遮蓋液。
  • 用Cobalt Blue畫在雪上的陰影。
  • 可在雪底加一些Yellow Ochre。
  • 如有需要,可用一些Prussian Blue和Violet修改一下雪的形狀。
Post a Comment